Special semi trailers by Alura Trailer upon customer needs;

 

Mafi chassis / Roll Trailer for port using;

Rigid and robust lowbed platform

Load capacity 80 Tons

ISO holes for containers 20ft / 40ft or 45 ft

Gooseneck tunnel with safety hooks

Cargo lashings all around the platform

Reflective corners and side markings for safety

20160223061315 

 

Hydraulic steering systems on Alura Trailers

 

Detachable goose neck low loaders by Alura Trailer

 

Extendable Trailers by Alura Trailer

 

Mobile Workshop Trailers by Alura Trailer

 

Technical specifications;

Dimensions :

Length : 7.400 mm

Width : 2.500 mm

Chassis : Its made from ST-52 and high resistant “I” cut chassis. 8 mm thickness chassis up and down 14 mm width for the 14 mm 120 mm

Plate for intensification from king pin to after legs 180X16 ST 52 steel and both of ends round shape

Turning Table : 1100/22 turning table at the front of trailer

Axles : 3 Osman Koc brand high quality axles with TUV certificate.

Suspension : Air suspension on the 3 axles

Air system : WABCO with EBS

Shock absorber : MAYSAN  brand and it has TUV certificate

Brake Adjusters : HALDEX  brand and it has TUV certificate

Twist locks : 4 units twist locks (Hand type/short arm) and they have TUV certificate. Twist locks’ places painted and pins will be galvanized to be seen at night.

Wheel and tyres : 315 80 R 22.5 12+1 units tyres and rims with TUV certificate

Electrical System : ASPOCH brand 24 V electrical system with side lamps led every 2.5 Meter – It has ADR certificate

Connectors 15 and 7 pin – 2 unit stop lamp by 7 functionally shall be covered with cage installed by bolts.

2 units import plate illumination lamp

Reflectors and velocity plates (European type)

All cables will be hold by cable-holder

Paint : Epoxy and paint with RAL code ......

Accessories :

·          2 units projectors
·          Pillars each side 4 units (For each side 4 X 600 mm) 
·          The place to collect pillars
·          Single part front wall height 1400 mm + 200 mm
·          Cable holders each 300 mm and settled under winches
·          Lashing rings at rear with 25 mm holes
·          Bumper and number plate frame.
·          Spare tyre frame with locking system
·          Toolbox 1 pcs (1200X600X600mm)
·          Woodbox 1 pcs – At the rear of trailer
·          Water tank (it will be fixed by welding)
·          6 units mudguards  
·          Fire extinguisher box & Box for licences
·          2 units rubber chocks at the rear of trailer
·          Buzzer on the bumper

 

Tandem-Pendel axle special lowbed trailer

Extendable Lowbed Semi Trailers

Front Loading lowbed semi trailers

Dolly Trailers